Good afternoon, i have installed a FreePBX Distro on a Dell Machine that has a 250Gb disk.
Cos it was failing to boot i had to manually point to the disk being used and Auto Partitioning during setup.
Everything is Ok however the Dashboard shows 50Gb disk being used. I don’t know what has gone wrong with the setup. Is there a way to increase the size of the partition without having to reinstall from the beginnning?
My Linux is not so good and i don’t know how to do it.
df shows this
[root@freepbx ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
devtmpfs 3892780 0 3892780 0% /dev
tmpfs 3906748 0 3906748 0% /dev/shm
tmpfs 3906748 9400 3897348 1% /run
tmpfs 3906748 0 3906748 0% /sys/fs/cgroup
/dev/mapper/s7_freepbx-root 52403200 7609944 44793256 15% /
/dev/nvme0n1p2 1038336 82900 955436 8% /boot
/dev/nvme0n1p1 204580 11436 193144 6% /boot/efi
/dev/mapper/s7_freepbx-home 188283060 631292 187651768 1% /home
tmpfs 781352 0 781352 0% /run/user/0
tmpfs 781352 0 781352 0% /run/user/995
vgs shows this
VG #PV #LV #SN Attr VSize VFree
s7_freepbx 1 3 0 wz–n- <237.28g 4.00m
Any help would be appreciated
6 posts - 3 participants