This morning I logged in to update the modules from GUI and noticed the error: “Warning: Cannot connect to online repository(s) (https://mirror.freepbx.org). Online modules are not available.”
I have not done any changes. This configuration worked in the past when I first installed FreePBX but I haven’t logged in for 2 months.
I logged in to CLI and tried pinging www.google.com and 8.8.8.8 with no result.
Traceroute lists:
1 * * *
2 * * *
3 * * *
and so on.
Tried disabling the firewall, reponsive firewall and IPS, restarting the network service and the system. Doesn’t change anything.
I can still make and receive outside calls with the SIP trunk.
FreePBX IP is: 172.20.2.95
route-eth0 looks like this:
172.20.2.0/24 via 172.20.5.1 dev eth0
172.20.3.0/24 via 172.20.5.1 dev eth0
192.168.3.0/24 via 172.20.5.1 dev eth0
172.20.5.0/24 via 172.20.5.1 dev eth0
ETH1 looks like this:
DEVICE=eth1
BOOTPROTO=static
ONBOOT=‘yes’
IPADDR=192.168.27.186
NETMASK=255.255.255.252
ZONE=external
GATEWAY=192.168.27.185
PEERDNS=no
IPV6_PEERDNS=no
DESCRIPTION=“unset”
ETH0 looks like this:
DEVICE=eth0
BOOTPROTO=static
ONBOOT=‘yes’
IPADDR=172.20.5.95
NETMASK=255.255.255.0
ZONE=internal
GATEWAY=172.20.5.1
PEERDNS=no
IPV6_PEERDNS=no
DESCRIPTION=“unset”
DNS servers are:
2 internals IPs
3rd one is 8.8.8.8
route -n lists:
Destination Gateway Genmask iface
0.0.0.0 192.168.27.185 0.0.0.0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 eth1
172.20.2.0 172.20.5.1 255.255.255.0 eth0
172.20.3.0 172.20.5.1 255.255.255.0 eth0
172.20.4.0 172.20.5.1 255.255.255.0 eth0
172.20.5.0 0.0.0.0 255.255.255.0 eth0
192.168.3.0 172.20.5.1 255.255.255.0 eth0
192.168.3.0 0.0.0.0 255.255.255.252 eth1
What am I doing wrong? I don’t understand how it worked in the past and now it doesn’t…
1 post - 1 participant