@pwostran wrote:
I installed the FreePBX 14 Distro 1710-1 today as i need to install a new PBX at a remote office. I used the same hardware as the FreePBX 13 thats running at the office but the 2nd NIC will not show up. eth0 is there but not eth1. The machine has 2 onboard NICs and they both are enabled in the BIOS. Doing a ifconfig shows eth0 and lo and a lspci only shows 1 nic. Has anyone come across this problem? Any help would be appreciated.
Thanks
Paul
Posts: 2
Participants: 2