HTTPS certs not installing from the HTTPS setup page
@posi211 wrote: Trying to get HTTPS to work. I have created a Let’s Encrypt and a self-signed certificates using the certificate management page. Then I go to system admin and HTTPS setup. Under...
View ArticleCan't install on NUC6i5SYH - "No driver found"
@demetri90 wrote: Trying to install latest distro with Asterisk 11 and FreePBX 13. I select the "No raid" option during boot, it loads for a bit and then presents me with a screen showing "No driver...
View ArticleFop2 vs iSymphony
@dcitelecom wrote: I am looking to add either the Fop2 or iSymphony operator panel to our system but would like to get some feedback from the forum if possible. Both look capable but Fop2 looks...
View ArticleModule upgrade error sysadmin
@jasonmel wrote: Hello, When attempting to update the sysadmin module from 13.0.57.2 to 13.0.57.7 I get an error which says, file_put_contents(/var/spool/asterisk/incron/sysadmin.fail2ban-generate):...
View ArticleSince Dashboard 13.0.22.1, FreePBX Stats Graph does not show
@johnjces wrote: Running FreePBX Distro 10.13.66-11. Until updating the Dashboard module a week or so ago, (am on edge mode), to 13.0.21 (or was it 13.0.22.1), one of them, the Stats graph remains...
View ArticleUsing Update Scripts
@digitalb wrote: Every time I use the update scripts (manually download from Wiki and running the scripts via putty) they run a module update which will download and install all modules even though I...
View ArticleNo Message when non-existent extension called
@stonet wrote: I have just loaded 10.13.66.12 64 bit with Asterisk 11. I find when I call a non existent extension I do not hear a message, it seems there is no handler setup for this: -- Executing...
View ArticleClik here to view.
Sending XMPP message to self crashes UCP daemon
@necits2015 wrote: If I send an XMPP message to my own extention it crashes the UCP daemon. Capture.JPG1264x636 43.3 KB Obviously this wouldn't be a normal practice but typos happen!! Posts: 3...
View ArticlePrivacy manager telling you who's calling
@simon_templar wrote: Hello, I have been using Asterisk for numerous years, and I am trying to switch to FreePBX. In Asterisk, I have the privacy manager setup. When someone calls and their CID is not...
View ArticlePhones go into "no service" when internet goes down... still?
@mcisar wrote: Recently had a circumstance where both our primary and backup internet connections went down. Shortly thereafter, all of our phones started to display "no service". In this location our...
View ArticleClik here to view.
Upgrade Went South
@jamsu wrote: Hello, I upgraded from 5.211.6 to 5.211.65 to 6.12.65-1 then to 6.12.65-32. This went as planned. Upgrading from 6.12.65-32 to 10.13.66-1 Did not. Is what the GUI goes to: FreePBX...
View Article"Outbound CID" overrides dont work!
@MAA wrote: Hello, PBX Firmware:10.13.66-12 I try set "Outbound CID" to one extension, but it does not work - always show extension number. Posts: 3 Participants: 3 Read full topic
View ArticleRing Group in Follow me-list
@rudycalces wrote: Hi all, I want to ask, can I dial ring group in follow me listI want include ring group on follow me list, so, if any incoming to some extention, follow me will call ring group too...
View ArticleNeed to know whwn the dial pattern was changed
@manjunath wrote: Hi guys ......I need to know when my dial pattern was changed in my asterisk , is there any way to find this ? Posts: 2 Participants: 2 Read full topic
View ArticleAsterisk 13.8.0 to 13.9.1 Upgrade on ARM, with FreePBX 13.0.143 GUI
@sghazagh wrote: Hello all,I had compiled and installed Asterisk 13.0.8 and FreePBX 13.2.x on an Ubuntu 15.10 Linux running on ARM based SoC called "Colibri T30" from Toradex Company. All are good and...
View ArticleClik here to view.
After update System Admin doing Strange things
@RichE wrote: After an update and the installation of CEL, System Admin is telling me there is a free or paid version available and that the machine needs to be activated which it is, also the...
View ArticlePBX-Version showing 6.12.65-32 after failed freepbx 13 upgrade
@rhoron wrote: Hi, We attempted to use the 12 to 13 GUI updater to upgrade to version 13, but the process failed. Per the instructions given during the failure, we used "amportal && fwconsole...
View ArticleGLIBC update errors
@andy_woolford wrote: I have been receiving errors about GLIBC after running the latest Distro upgrade in System Admin. I am currently at:PBX Firmware: 10.13.66-12PBX Service Pack: 1.0.0.0 cat...
View ArticleUpgrade Directory Pro and IVR Pro to current "non-commercial" versions?
@mcisar wrote: Running distro version 10.13.66-13 all modules supposedly up-to-date... but I was looking at the recent bulletin about Sangoma's opening of several modules and started to scratch my...
View ArticleWoops error in Bulk Import of extensions
@mpelchat wrote: I'm trying to import a list of 20(ish) extensions into FreePBX. The preview is fine, but I get a "Whoops error" when I try and import. It says "Undefined Index: Dial". Error is in...
View Article