VVX 400 - TFTP Issue
@nebusoku wrote: I have a Distro running and just adding in VVX400 units and these new phones will not tftp down a config file, I have tried multiple firmwares on the phones with no change Phones show...
View ArticlePidging not showing XMPP status FreePBX V13.0.190.7
@Bumbaa wrote: Hello,I am using Free V13.0.190.7 and installed prosody for the IM server and enabled XMPP presence in the FreePBX gui interface. When I use Pidgin, it always shows available and does...
View ArticleNice Feature!
@GSnover wrote: Logged in and checked my E-Mail this morning and saw this: Schmoozecom Alerts asterisk@bdc-llc.comStorage Alert for 20797639.deployments.pbxact.com Storage space is getting high on the...
View ArticleResponsive Firewall
@JessicaRabbit wrote: I unsure what this statement refers to. "Note that if you have explicitly granted 'External' connections access to a protocol, this filtering and rate limiting will not be used....
View ArticleFreePBX Distro and Asterisk 14
@serp wrote: Hello everyone. We have the FreePBX distro 10-13.65.17. We tried to change the asterisk version from 13 to 14 (beta) with asterisk-version-switch utility. But when it upgraded, FreePBX...
View ArticlePlanned release of stable SNG7 distro
@avayax wrote: What is the envisioned approximate release date of a stable production version of the new Sangoma 7 distro? Posts: 4 Participants: 2 Read full topic
View ArticleClik here to view.
Default sample rate for Opus in SNG7
@avayax wrote: When selecting Opus as the main codec in SIP settings for SNG7, what is the sample rate used, 8kHz narrowband or 16kHz wideband? Pasted image763x201 10.6 KB If Opus can be either...
View ArticleReason why FreePbxDistro, AsteriskLog has 'debug' and 'security' enabled by...
@4allbusiness wrote: Hello FreePBX, Is there a special reason to enable 'debug' and 'security' by default after a FpbxDistro 13 install?I used to know that 'debug' is very 'Verbose' as also said in...
View ArticleResponsive Firewall not blocking SIP scanning attacks
@dcitelecom wrote: I think the responsive firewall is not working as it should. I see thousands of lines in the log, all day long. It should be rate limiting the attacks and then blocking it but it...
View Article"Reports - Asterisk Info - Peers" do not show "Display Name"
@MAA wrote: Hello, "Reports - Asterisk Info - Peers" do not show "Display Name"How to add it? Posts: 1 Participants: 1 Read full topic
View ArticleUpgrade path to FPBX14 beta
@moodinsk wrote: Yo. Sorry if this is has been answered elsewhere, I looked and couldnt find a straight answer. I have a test/home virtual PBX at home and I wanted to upgrade it to the latest FPBX...
View ArticleMoving hard drive with distro installed to another computer, would it work?
@Marbled wrote: Hi! If I moved an hard drive with a FreePBX distro installed to another computer, would it work? I tried moving a hard drive with a Linux distro from one computer to another many years...
View ArticleClik here to view.
RoomX under Freepbx
@danardf wrote: Hi. I'm Franck Danard from the old Elastix community. And Roomx's dad. I would like to know how many people are intersted by RoomX under Freepbx? Just to know if i need to start a new...
View ArticleSending email from Gmail
@amatt14 wrote: I am trying to setup my freepbx to send voicemail messages as an attachment through email. I had this working before upgrading to v13 now it is not sending. i even paid for the system...
View ArticleQueue Call back going to Blind Transfer
@jadams wrote: Seeing an odd behavior on Queues Pro for Call Backs. Periodically when a customer enters the information for the call back and end with # it will put them into a blind transfer and open...
View ArticleUnclear instructions on upgrading official FPBX Distro from 12 to 13 using...
@ericbramini wrote: I must have read the wiki a dozen times but it's not very clear about upgrading from one version to another (updates inside of a version is perfectly clear). I have been a FPBX...
View ArticleUpgrade from 6.12.65.25 to 10.13.66-1
@techs wrote: I just recently upgraded from .12.65.25 to 10.13.66-1. The upgrade seemed to go fine except, that EPM and Fax Pro were disabled after the upgrade because my support for updates was...
View ArticleUpgrading and migrating servers-looking for guidance
@demani wrote: Originally installed FreePBX years ago, but as of late the machine has been rebooting nearly every day. It is running FreePBX 2.11.0.43 (off the Distro install, v 3.211.63-8). I decided...
View ArticleCall back (camp-on) not working
@lhalepH wrote: Hi,I have Asterisk 13.9.1 with FreePBX distro 13.0.190.7. I am trying the following: Extension A calls extension B. But extension B is busy. So extension A hungs up and then press *82...
View ArticleHelp provisioning Polycom phones with EPM
@Altocloud1 wrote: My first post and first FreePBX so I'll do my best! I'm trying to provision Polycom IP650 phones automatically using TFTP or HTTP. When I look at the debugs in the Polycom I see...
View Article