FreePBX v12 Trunk setup with Flowroute's new PoP service
@lentilbean wrote: In case there is someone else that is looking for help in setting up FreePBX v12 with Flowroute, here is what I did: In Flowroute I picked my favorite PoP (us-east-nj). Will need...
View ArticleVultr and setting up the firewall
@daschenbrener wrote: I have been able to successfull setup a freePBX distro on a Vultr server via the ISO install. i have everything working except i am unable to recive incoming audio which what i...
View ArticleClik here to view.
Failed to open efi boot grubx64.efi - not found
@franzanselmo wrote: good afternoon I had problems with electric power, does not turn on and this message appears: failed to open efi boot grubx64.efi - not found failed to load image...
View ArticleSet Call Forwarding for other extension with shortcut
@oli170 wrote: Hi, actually I test FreePBX distro (14.05.25) together with a Vega 60G analog adapter to get some analog phones running. Works all fine for now with one expection: I want to achieve to...
View ArticleClik here to view.
Performance Issues/erratic behavor in KVM/Proxmox V3.x: Suggestions on this?
@GeekBoy wrote: So I had put the most recent version (at the time) in a KVM virtual machine about four months ago,. I noticed right off the bat, the virtual machine was running a bit sluggish, but...
View ArticleEmail settings for freepbx
@RalphGraham wrote: I am unable to get voicemail to email to work. Emails are sent by the system but are not received at my email address. My email provider is Hover.com who tell me that the Internal...
View ArticleOffsite IVR, Recording, and Voicemail Management
@nmarques wrote: Hi all, I’m wondering what it takes for a customer to be able to call a system, where an IVR answers, and be able to change system recordings, manage voicemail, and other IVRs. Some...
View ArticleHow can a user switch to the temporary greeting
@tonyg wrote: hi, I see in UCP, in the VM applet, there is a way to record a temporary greeting, however, i cannot find any way to use it…can anyone tell me how this greeting is used? thanks Posts: 3...
View ArticleUCP CDR Downloads dont work with gsm format
@MAA wrote: Hello, FreePBX 12.0.76.6 For several years everything worked well, but unexpectedly now UCP CDR Downloads dont work with gsm format. (issue like this UCP downloads not working) Why did...
View ArticleClik here to view.
FreePBX rejects calls starting with +7
@MRyazanov wrote: Hello everybody! We confront with next problem during freepbx configuration: Having the following dial patterns, we can dial russian numbers without “+” sing (for example 73433020102...
View ArticleSNG7 Dahdi configuration
@Anointedone wrote: Hi, I am attempting to configure Dahdi on FreePbx SNG7. My issue is: I am unable to list channels or spans. All other commands operate as expected and Dahdi services starts OK....
View ArticleInitiating calls thru cli or rest
@xax wrote: Hello, at the moment we use a Asterisk based system that has some features we want to keep after switching to FreePBX Distro 14 with Asterisk 13. First funtion: We can initiate calls from...
View ArticleIVR dialing
@Badddawg wrote: When the IVR answers and I attempt to dial a 4 digit extension number, after the first digit, I receive, “We have not received a valid response.” Thoughts? Posts: 3 Participants: 3...
View ArticleClik here to view.
Vega bridge service for Vega configuration is not running
@tonyg wrote: hi, I am using FreePBX 14.0.5.25 with all modules current. i tried to use the vega module today and was presented with this banner error. image.png1209×208 13.4 KB also, the module would...
View ArticleClik here to view.
Legacy FreePBX Distro with fail2ban 0.9.6
@lorn10 wrote: Hi folks Here follows an “unsupported configuration” topic from my side. My legacy FreePBX 11 Distro is running quite well. Unfortunately the original fail2ban 0.8.8 service has stopped...
View ArticleSupport for SNMP UPS
@feisal wrote: Hi The ups monitor, apcupsd supports snmp out of the box. I have a particular setup where my upses have network cards and power several devices. SNMP gives me the the ability to monitor...
View ArticleAlerts ringtones still not working
@ashcortech wrote: Freepbx Distro 13.0.196.2 / Asterisk 13.23.1 follow up on closed issue Paging and intercomm Broken since module updates Phones are D40’s and on Firmware 2.8.0 The issue persists....
View ArticleLetsencrypt cert with pacemaker 2 nodes freepbx cluster
@xevilstar wrote: Hello, Got two nodes with a failover ip. The A record points to that failover ip. I have generated a letsencrypt-auto -d machine certificate on the master node. On the master node...
View ArticleSource RPM for Asterisk 16.3?
@computertechs wrote: I’m not sure where else to post this, but the source RPM for Asterisk 16.3 appears to be missing from the development repos when I try to retrieve it. The 13.26-2 SRPM is already...
View ArticleLatest (sng7-testing) kmod updates failing install pre-check
@mhetterm wrote: Latest set of kmod updates from yum fail install check with these issues: Resolving Dependencies –> Running transaction check —> Package kmod-cciss.x86_64 0:3.6.26-6.sng7 will...
View Article