Help with dual nics and routing

@rpatrik wrote:

Need a little assistance as I am still a little new if possible.

I have a new freepbx setup on a hyper v machine with two NICs ;

eth0 is local network (phones, computer, and server)
IP-192.168.1.X
netmask - 255.255.255.0
GW - 192.168.1.X

Eth1 (dedicated port on modem from SIP/ISP provider for SIIP traffic)
IP - 10.0.30.X/29
GW - 10.0.30.X

I have had a few struggles, phones connect no issues, but outgoing calls no audio and timeout, in coming hangs up very quickly.
Now also have no internet on the freepbx machine.

I have specified the default nic as the 10.0.30.X (eth1)

tried adding a route command route -add 192.168.1.X via 10.0.30.X eth1 (or similar) and that seemingly lost connection to the machine

I would appreciate some help getting the route for this to work properly, as they would like this going asap.
Keep in mind, I am still new to the whole Freepbx thing

Posts: 3

Participants: 2

Read full topic