Changing IP addresses on network
@josephchrz wrote: Hello I’m setting up a new freepbx at home and moving it to my small office. The problem is my home network is a 192 address but my small office is a 10.1 address. I looked online...
View ArticleStandalone System Chrony Setup, Help Please
@ronsch wrote: We just installed a SNG7 vsn 2002 ISO on a standalone server with Digium phones (the system will be used for off-grid emergency communications). When connected to the Internet the...
View ArticleHelp with dual nics and routing
@rpatrik wrote: Need a little assistance as I am still a little new if possible. I have a new freepbx setup on a hyper v machine with two NICs ; eth0 is local network (phones, computer, and server)...
View ArticleHow to disable sudo lecture?
@Quafi wrote: Hey there, I need to disable the sudo lecture for a specific user, so my monitoring agent can work properly. How do I do that properly? I’m always careful with custom operating systems,...
View ArticleOpenVPN server setup
@faisalkhan wrote: hi all, I want to deploy openvpn server on my freepbx system. I am using distro freepbx 14 and found that it’s already installed. but following the different guides from internet or...
View ArticleFreePbx OPENVPN setup
@mst wrote: Experts, I am trying to install OpenVPN on FreePBX 15.0.16. Is there any way to install OpenVPN or do I have to pay $25 for System Admin to have VPN available? Posts: 4 Participants: 4...
View ArticleMail server continually trying to send emails after a failure
@bksales wrote: I put in an AOL address into the voicemail to email field and it worked for a day but then I started seeing a bunch of these Messages from [pbx IP] temporarily deferred due to user...
View ArticleFresh load, can't shut down with ACPI
@kristiandg wrote: Good morning, all. I recently loaded FPBX 15 to play with, and something I noticed to my past experience with FPBX 13 & 14, is that I can no longer control it’s power/reboot via...
View ArticleYum update error
@sentinelace wrote: I am simply trying to do a yum update and it’s say there are no mirrors to try for digium. I have run Yum clean all with same results and also ran yum --enablerepo=sng-pkgs clean...
View ArticleNeed Help With Issues Using Postfix Generic Rewrite
@urbnsr wrote: I have been following along with this Wiki: https://wiki.freepbx.org/display/PPS/Setup+Postfix+Manually to send messages out into the real world. I still can’t get it to rewrite the...
View ArticleL2TP/IPSec Tunnel
@mmoo9154 wrote: I’m not sure what category this should be under, so I’m leaving it uncategorized. Feel free to move it where it belongs or tell me where it should go and I’ll move it. -Mark I see...
View ArticleClik here to view.
Hostname wrong in fail2ban emails
@bksales wrote: I have a couple issues with this server. The hostname seems to be correct but in the email it’s showing localhost. Also, I don’t have any idea why it would be allowing SSH login...
View ArticleAny plans to update fail2ban?
@SamShomi wrote: The current version of fail2ban in the distro is 0.8.14 which is ancient. I don’t use the distro but when I install the current stable version of fail2ban (v0.10.5-2.el7 at the time...
View ArticleFixed: Static ip to dynamic ip or change static ip address on a older freepbx?
@josephchrz wrote: Hello i was searching for a way to go from Static ip back to dynamic Ip address for the freepbx? Everything i searched for shows up as going from dynamic ip to static ip address....
View ArticlePXE Kickstart error when installing Sangoma7
@grayhame wrote: I’m working on using PXE to install a system and I after the kickstart process starts, it reports the error “Error setting up base repository”. I’ve confirmed the URL’s that it’s...
View ArticleNodeJS install error on new installed FreePBX
@alishokoie wrote: Hi all, I’ve installed freepbx 14 on AWS EC2 , but by every update or action such an installing commercial module, there is an error with NodeJS that said me, that I need node 8.0.0...
View ArticleClik here to view.
Problem with installation freepbx
@stappaf wrote: image.jpg2592×1936 1.47 MB i installed freepbx and every thing seems to work properly but now i get the attached screen and there is no ip-adress to run in browser. What is wrong?...
View ArticleBackup Utility reports disk problems following V15 Distro Install
@JessicaRabbit wrote: I image backup my PBX periodically using an Acronis 2018 bootable disk. Following two installs of the V15 distro the utility complains that there are disk format errors and wants...
View ArticleAllow VSFTP access to /var/spool/asterisk/monitor
@jerryriggin wrote: I need to allow LAN server FTP or SFTP access to /var/spool/asterisk/monitor to collect recordings. I have added a user and tried various configurations of /etc/vsftp/vsftp.conf,...
View ArticleCan't intstall FreePBX13 due to pgp error
@ashcortech wrote: Trying to install a new FreePBX13 Distro so I can restore an older system, then upgrade it to 14. Problem is, getting the PGP error because the keys are out of date and apparently...
View Article