@IanChong wrote:

I’m new to FreePBX. I was encouraged by an equipment supplier to try it out as it did not require significant hardware cost. So, I got an hp 255 G6 (AMD A6, 4GB RAM, 500GB HDD) and tried installing the following starting with a, then b, then c at least 3 times each;

a. STABLE SNG7-PBX-64bit-2008-1

b. HISTORICAL SNG7-PBX-64bit-1904 Release Date: May 2019

c. HISTORICAL (End of Life 2016) 10.13.66-32bit Release Date: 2016

In each case the installation process started as described in the wiki, but then after about 10 minutes, got stuck around 80%. The installation hung at "Installing kmod -dahdi-linux (625/729) and then powered off the PC.

At first I thought there may be an incompatibility issue between my hardware and Linux so I installed Ubuntu 20.04.1 and it installed and ran fine.

So I went back to trying to install the above mentioned versions of FreePBX again, but had the same failures.

Please can someone tell me what I can do to get around this issue so I can start testing out FreePBX?

Thanks…

Posts: 1

Participants: 1

Read full topic

@robyf wrote:

Hi,

I’m following the instruction at Applying+patches+to+Asterisk+in+distro+SNG7 (sorry cannot post links yet) which was working up to v16.9 or 16.10, but today traying to rebuild v16.13 it seems to not work anymore.

Any idea how solve it?

[root@tse0021 asterisk-srpm]# ll
total 54280
-rw-r–r-- 1 root root 27735450 Sep 23 20:00 asterisk-16.13.0.tar.gz
-rw-r–r-- 1 root root 27758916 Sep 10 03:57 asterisk16-16.13.0-1.sng7.src.rpm
-rw-r–r-- 1 root root 42140 Sep 23 20:00 asterisk16.spec
-rw-r–r-- 1 root root 606 Sep 23 20:00 asterisk.logrotate
-rw-r–r-- 1 root root 10716 Sep 23 20:00 lazymembers-17.6.0.patch
-rw-r–r-- 1 root root 552 Jan 14 2019 Makefile
-rw-r–r-- 1 root root 1362 Sep 23 20:00 voicemail-splitopts-imapstorage.patch
-rw-r–r-- 1 root root 1298 Sep 23 20:00 voicemail-splitopts-odbcstorage.patch
-rw-r–r-- 1 root root 2669 Sep 23 20:00 voicemail-splitopts.patch
[root@tse0021 asterisk-srpm]# make
make: *** No rule to make target results/%{pkg_name}-16.13.0-1.sng7.src.rpm', needed byresults/%{pkg_name}-16.13.0-1.sng7.x86_64.rpm’. Stop.

Posts: 1

Participants: 1

Read full topic

@jarvisswope wrote:

I upgraded freepbx to 15 and when it rebooted i get stuck at the Dracut Emergency Shell
See attached pictures.

I have ran blkid and it shows the disks.

System is down hellppppp

Boot Errorr.PNG1335×565 54.4 KB

blk.PNG1327×343 34.4 KB

Posts: 2

Participants: 2

Read full topic

@tonyg wrote:

hi, i am using distro 15. i patched not to long ago with no issues, but i went to patch again yesterday. and got these errors

Error: Package: sangoma-pbx-2008-1.sng7.noarch (sng-pkgs)
           Requires: kmod-via-rhine
           Removing: kmod-via-rhine-1.5.2-1.sng7.x86_64 (@anaconda/1703)
               kmod-via-rhine = 1.5.2-1.sng7
           Available: kmod-via-rhine-1.5.1-4.sng7.x86_64 (sng-pkgs)
               kmod-via-rhine = 1.5.1-4.sng7
           Available: kmod-via-rhine-1.5.1-5.sng7.x86_64 (sng-pkgs)
               kmod-via-rhine = 1.5.1-5.sng7
           Available: kmod-via-rhine-1.5.1-6.sng7.x86_64 (sng-pkgs)
               kmod-via-rhine = 1.5.1-6.sng7
Error: Package: sangoma-pbx-2008-1.sng7.noarch (sng-pkgs)
           Requires: kmod-via-velocity
           Removing: kmod-via-velocity-1.16-1.sng7.x86_64 (@anaconda/1703)
               kmod-via-velocity = 1.16-1.sng7
           Available: kmod-via-velocity-1.15-2.sng7.x86_64 (sng-pkgs)
               kmod-via-velocity = 1.15-2.sng7
           Available: kmod-via-velocity-1.15-3.sng7.x86_64 (sng-pkgs)
               kmod-via-velocity = 1.15-3.sng7
           Available: kmod-via-velocity-1.15-4.sng7.x86_64 (sng-pkgs)
               kmod-via-velocity = 1.15-4.sng7

anyone give me a clue as to what to do about this?

here is the full log if anyone needs it
thanks in advance

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2020.09.27 12:02:14 =~=~=~=~=~=~=~=~=~=~=~=
—> Package kmod-libs.x86_64 0:20-23.el7 will be updated
—> Package kmod-libs.x86_64 0:20-28.el7 will be an update
—> Package kmod-wanpipe.x86_64 0:7.0.25-2.sng7 will be updated
—> Package kmod-wanpipe.x86_64 0:7.0.25-3.sng7 will be an update
—> Package kpartx.x86_64 0:0.4.9-123.el7 will be updated
—> Package kpartx.x86_64 0:0.4.9-131.el7 will be an update
—> Package krb5-libs.x86_64 0:1.15.1-37.el7_6 will be updated
—> Package krb5-libs.x86_64 0:1.15.1-46.el7 will be an update
—> Package libX11.x86_64 0:1.6.5-2.el7 will be updated
—> Package libX11.x86_64 0:1.6.7-2.el7 will be an update
—> Package libX11-common.noarch 0:1.6.5-2.el7 will be updated
—> Package libX11-common.noarch 0:1.6.7-2.el7 will be an update
—> Package libacl.x86_64 0:2.2.51-14.el7 will be updated
—> Package libacl.x86_64 0:2.2.51-15.el7 will be an update
—> Package libavdevice.x86_64 0:3.1.1-2.sng7 will be updated
—> Package libavdevice.x86_64 0:3.1.1-4.sng7 will be an update
—> Package libblkid.x86_64 0:2.23.2-59.el7_6.1 will be updated
—> Package libblkid.x86_64 0:2.23.2-63.el7 will be an update
—> Package libcap.x86_64 0:2.22-9.el7 will be updated
—> Package libcap.x86_64 0:2.22-11.el7 will be an update
—> Package libcom_err.x86_64 0:1.42.9-13.el7 will be updated
—> Package libcom_err.x86_64 0:1.42.9-17.el7 will be an update
—> Package libcurl.x86_64 0:7.29.0-51.el7 will be updated
—> Package libcurl.x86_64 0:7.29.0-57.el7_8.1 will be an update
—> Package libdb.x86_64 0:5.3.21-24.el7 will be updated
—> Package libdb.x86_64 0:5.3.21-25.el7 will be an update
—> Package libdb-utils.x86_64 0:5.3.21-24.el7 will be updated
—> Package libdb-utils.x86_64 0:5.3.21-25.el7 will be an update
—> Package libdrm.x86_64 0:2.4.91-3.el7 will be updated
—> Package libdrm.x86_64 0:2.4.97-2.el7 will be an update
—> Package libffi.x86_64 0:3.0.13-18.el7 will be updated
—> Package libffi.x86_64 0:3.0.13-19.el7 will be an update
—> Package libgcc.x86_64 0:4.8.5-36.el7_6.2 will be updated
—> Package libgcc.x86_64 0:4.8.5-39.el7 will be an update
—> Package libgomp.x86_64 0:4.8.5-36.el7_6.2 will be updated
—> Package libgomp.x86_64 0:4.8.5-39.el7 will be an update
—> Package libicu.x86_64 0:50.1.2-17.el7 will be updated
—> Package libicu.x86_64 0:50.2-4.el7_7 will be an update
—> Package libicu-devel.x86_64 0:50.1.2-17.el7 will be updated
—> Package libicu-devel.x86_64 0:50.2-4.el7_7 will be an update
—> Package libjpeg-turbo.x86_64 0:1.2.90-6.el7 will be updated
—> Package libjpeg-turbo.x86_64 0:1.2.90-8.el7 will be an update
—> Package libmount.x86_64 0:2.23.2-59.el7_6.1 will be updated
—> Package libmount.x86_64 0:2.23.2-63.el7 will be an update
—> Package libmspack.x86_64 0:0.5-0.6.alpha.el7 will be updated
—> Package libmspack.x86_64 0:0.5-0.7.alpha.el7 will be an update
—> Package libpcap.x86_64 14:1.5.3-11.el7 will be updated
—> Package libpcap.x86_64 14:1.5.3-12.el7 will be an update
—> Package libreport-filesystem.x86_64 0:2.1.11-42.el7.centos will be updated
—> Package libreport-filesystem.x86_64 0:2.1.11-53.el7.centos will be an update
—> Package libseccomp.x86_64 0:2.3.1-3.el7 will be updated
—> Package libseccomp.x86_64 0:2.3.1-4.el7 will be an update
—> Package libselinux.x86_64 0:2.5-14.1.el7 will be updated
—> Package libselinux.x86_64 0:2.5-15.el7 will be an update
—> Package libselinux-python.x86_64 0:2.5-14.1.el7 will be updated
—> Package libselinux-python.x86_64 0:2.5-15.el7 will be an update
—> Package libselinux-utils.x86_64 0:2.5-14.1.el7 will be updated
—> Package libselinux-utils.x86_64 0:2.5-15.el7 will be an update
—> Package libsmartcols.x86_64 0:2.23.2-59.el7_6.1 will be updated
—> Package libsmartcols.x86_64 0:2.23.2-63.el7 will be an update
—> Package libsndfile.x86_64 0:1.0.25-10.el7 will be updated
—> Package libsndfile.x86_64 0:1.0.25-11.el7 will be an update
—> Package libss.x86_64 0:1.42.9-13.el7 will be updated
—> Package libss.x86_64 0:1.42.9-17.el7 will be an update
—> Package libssh2.x86_64 0:1.4.3-12.el7_6.2 will be updated
—> Package libssh2.x86_64 0:1.8.0-3.el7 will be an update
—> Package libstdc++.x86_64 0:4.8.5-36.el7_6.2 will be updated
—> Package libstdc++.x86_64 0:4.8.5-39.el7 will be an update
—> Package libstdc+±devel.x86_64 0:4.8.5-36.el7_6.2 will be updated
—> Package libstdc+±devel.x86_64 0:4.8.5-39.el7 will be an update
—> Package libtalloc.x86_64 0:2.1.13-1.el7 will be updated
—> Package libtalloc.x86_64 0:2.1.16-1.el7 will be an update
—> Package libtiff.x86_64 0:4.0.3-27.el7_3 will be updated
—> Package libtiff.x86_64 0:4.0.3-32.el7 will be an update
—> Package libtiff-tools.x86_64 0:4.0.3-27.el7_3 will be updated
—> Package libtiff-tools.x86_64 0:4.0.3-32.el7 will be an update
—> Package libtirpc.x86_64 0:0.2.4-0.15.el7 will be updated
—> Package libtirpc.x86_64 0:0.2.4-0.16.el7 will be an update
—> Package libuuid.x86_64 0:2.23.2-59.el7_6.1 will be updated
—> Package libuuid.x86_64 0:2.23.2-63.el7 will be an update
—> Package libxml2.x86_64 0:2.9.1-6.el7_2.3 will be updated
—> Package libxml2.x86_64 0:2.9.1-6.el7.4 will be an update
—> Package libxml2-python.x86_64 0:2.9.1-6.el7_2.3 will be updated
—> Package libxml2-python.x86_64 0:2.9.1-6.el7.4 will be an update
—> Package linux-firmware.noarch 0:20180911-69.git85c5d90.el7 will be updated
—> Package linux-firmware.noarch 0:20191203-76.gite8a0f4c.el7 will be an update
—> Package lldpad.x86_64 0:1.0.1-3.git036e314.el7 will be updated
—> Package lldpad.x86_64 0:1.0.1-5.git036e314.el7 will be an update
—> Package lm_sensors.x86_64 0:3.4.0-6.20160601gitf9185e5.el7 will be updated
—> Package lm_sensors.x86_64 0:3.4.0-8.20160601gitf9185e5.el7 will be an update
—> Package lm_sensors-libs.x86_64 0:3.4.0-6.20160601gitf9185e5.el7 will be updated
—> Package lm_sensors-libs.x86_64 0:3.4.0-8.20160601gitf9185e5.el7 will be an update
—> Package logrotate.x86_64 0:3.8.6-17.el7 will be updated
—> Package logrotate.x86_64 0:3.8.6-19.el7 will be an update
—> Package lvm2.x86_64 7:2.02.180-10.el7_6.8 will be updated
—> Package lvm2.x86_64 7:2.02.186-7.el7_8.2 will be an update
—> Package lvm2-libs.x86_64 7:2.02.180-10.el7_6.8 will be updated
—> Package lvm2-libs.x86_64 7:2.02.186-7.el7_8.2 will be an update
—> Package lz4.x86_64 0:1.7.5-2.el7 will be updated
—> Package lz4.x86_64 0:1.7.5-3.el7 will be an update
—> Package make.x86_64 1:3.82-23.el7 will be updated
—> Package make.x86_64 1:3.82-24.el7 will be an update
—> Package mariadb.x86_64 1:5.5.60-1.el7_5 will be updated
—> Package mariadb.x86_64 1:5.5.65-1.el7 will be an update
—> Package mariadb-libs.x86_64 1:5.5.60-1.el7_5 will be updated
—> Package mariadb-libs.x86_64 1:5.5.65-1.el7 will be an update
—> Package mariadb-server.x86_64 1:5.5.60-1.el7_5 will be updated
—> Package mariadb-server.x86_64 1:5.5.65-1.el7 will be an update
—> Package mdadm.x86_64 0:4.1-rc1_2.el7 will be updated
—> Package mdadm.x86_64 0:4.1-4.el7 will be an update
—> Package mesa-libEGL.x86_64 0:18.0.5-4.el7_6 will be updated
—> Package mesa-libEGL.x86_64 0:18.3.4-7.el7_8.1 will be an update
—> Package mesa-libGL.x86_64 0:18.0.5-4.el7_6 will be updated
—> Package mesa-libGL.x86_64 0:18.3.4-7.el7_8.1 will be an update
—> Package mesa-libgbm.x86_64 0:18.0.5-4.el7_6 will be updated
—> Package mesa-libgbm.x86_64 0:18.3.4-7.el7_8.1 will be an update
—> Package mesa-libglapi.x86_64 0:18.0.5-4.el7_6 will be updated
—> Package mesa-libglapi.x86_64 0:18.3.4-7.el7_8.1 will be an update
—> Package mod_ssl.x86_64 1:2.4.6-89.13.sng7.sangoma will be updated
—> Package mod_ssl.x86_64 1:2.4.6-93.el7.centos will be an update
—> Package mokutil.x86_64 0:15-2.el7.centos will be updated
—> Package mokutil.x86_64 0:15-8.el7 will be an update
—> Package neon.x86_64 0:0.30.0-3.el7 will be updated
—> Package neon.x86_64 0:0.30.0-4.el7 will be an update
—> Package net-snmp.x86_64 1:5.7.2-37.el7 will be updated
—> Package net-snmp.x86_64 1:5.7.2-48.el7_8.1 will be an update
—> Package net-snmp-agent-libs.x86_64 1:5.7.2-37.el7 will be updated
—> Package net-snmp-agent-libs.x86_64 1:5.7.2-48.el7_8.1 will be an update
—> Package net-snmp-libs.x86_64 1:5.7.2-37.el7 will be updated
—> Package net-snmp-libs.x86_64 1:5.7.2-48.el7_8.1 will be an update
—> Package net-tools.x86_64 0:2.0-0.24.20131004git.el7 will be updated
—> Package net-tools.x86_64 0:2.0-0.25.20131004git.el7 will be an update
—> Package nmap.x86_64 2:6.40-16.el7 will be updated
—> Package nmap.x86_64 2:6.40-19.el7 will be an update
—> Package nmap-ncat.x86_64 2:6.40-16.el7 will be updated
—> Package nmap-ncat.x86_64 2:6.40-19.el7 will be an update
—> Package nodejs.x86_64 2:8.11.3-1.7 will be updated
—> Package nodejs.x86_64 2:8.16.0-1.11 will be an update
—> Package nspr.x86_64 0:4.19.0-1.el7_5 will be updated
—> Package nspr.x86_64 0:4.21.0-1.el7 will be an update
—> Package nss.x86_64 0:3.36.0-7.1.el7_6 will be updated
—> Package nss.x86_64 0:3.44.0-7.el7_7 will be an update
—> Package nss-pem.x86_64 0:1.0.3-5.el7_6.1 will be updated
—> Package nss-pem.x86_64 0:1.0.3-7.el7 will be an update
—> Package nss-softokn.x86_64 0:3.36.0-5.el7_5 will be updated
—> Package nss-softokn.x86_64 0:3.44.0-8.el7_7 will be an update
—> Package nss-softokn-freebl.x86_64 0:3.36.0-5.el7_5 will be updated
—> Package nss-softokn-freebl.x86_64 0:3.44.0-8.el7_7 will be an update
—> Package nss-sysinit.x86_64 0:3.36.0-7.1.el7_6 will be updated
—> Package nss-sysinit.x86_64 0:3.44.0-7.el7_7 will be an update
—> Package nss-tools.x86_64 0:3.36.0-7.1.el7_6 will be updated
—> Package nss-tools.x86_64 0:3.44.0-7.el7_7 will be an update
—> Package nss-util.x86_64 0:3.36.0-1.1.el7_6 will be updated
—> Package nss-util.x86_64 0:3.44.0-4.el7_7 will be an update
—> Package ntp.x86_64 0:4.2.6p5-28.el7.centos will be updated
—> Package ntp.x86_64 0:4.2.6p5-29.el7.centos.2 will be an update
—> Package ntpdate.x86_64 0:4.2.6p5-28.el7.centos will be updated
—> Package ntpdate.x86_64 0:4.2.6p5-29.el7.centos.2 will be an update
—> Package numactl-libs.x86_64 0:2.0.9-7.el7 will be updated
—> Package numactl-libs.x86_64 0:2.0.12-5.el7 will be an update
—> Package open-vm-tools.x86_64 0:10.2.5-3.el7 will be updated
—> Package open-vm-tools.x86_64 0:10.3.10-2.el7_8.1 will be an update
—> Package openssh.x86_64 0:7.4p1-16.el7 will be updated
—> Package openssh.x86_64 0:7.4p1-21.el7 will be an update
—> Package openssh-clients.x86_64 0:7.4p1-16.el7 will be updated
—> Package openssh-clients.x86_64 0:7.4p1-21.el7 will be an update
—> Package openssh-server.x86_64 0:7.4p1-16.el7 will be updated
—> Package openssh-server.x86_64 0:7.4p1-21.el7 will be an update
—> Package openssl.x86_64 1:1.0.2k-16.el7_6.1 will be updated
—> Package openssl.x86_64 1:1.0.2k-19.el7 will be an update
—> Package openssl-libs.x86_64 1:1.0.2k-16.el7_6.1 will be updated
—> Package openssl-libs.x86_64 1:1.0.2k-19.el7 will be an update
—> Package openvpn.x86_64 0:2.4.7-1.el7 will be updated
—> Package openvpn.x86_64 0:2.4.9-1.el7 will be an update
—> Package pam.x86_64 0:1.1.8-22.el7 will be updated
—> Package pam.x86_64 0:1.1.8-23.el7 will be an update
—> Package pango.x86_64 0:1.42.4-2.el7_6 will be updated
—> Package pango.x86_64 0:1.42.4-4.el7_7 will be an update
—> Package parted.x86_64 0:3.1-29.el7 will be updated
—> Package parted.x86_64 0:3.1-32.el7 will be an update
—> Package passwd.x86_64 0:0.79-4.el7 will be updated
—> Package passwd.x86_64 0:0.79-6.el7 will be an update
—> Package patch.x86_64 0:2.7.1-10.el7_5 will be updated
—> Package patch.x86_64 0:2.7.1-12.el7_7 will be an update
—> Package perl.x86_64 4:5.16.3-294.el7_6 will be updated
—> Package perl.x86_64 4:5.16.3-295.el7 will be an update
—> Package perl-Git.noarch 0:1.8.3.1-20.el7 will be updated
—> Package perl-Git.noarch 0:1.8.3.1-23.el7_8 will be an update
—> Package perl-Pod-Escapes.noarch 1:1.04-294.el7_6 will be updated
—> Package perl-Pod-Escapes.noarch 1:1.04-295.el7 will be an update
—> Package perl-Socket.x86_64 0:2.010-4.el7 will be updated
—> Package perl-Socket.x86_64 0:2.010-5.el7 will be an update
—> Package perl-libs.x86_64 4:5.16.3-294.el7_6 will be updated
—> Package perl-libs.x86_64 4:5.16.3-295.el7 will be an update
—> Package perl-macros.x86_64 4:5.16.3-294.el7_6 will be updated
—> Package perl-macros.x86_64 4:5.16.3-295.el7 will be an update
—> Package plymouth.x86_64 0:0.8.9-0.31.20140113.el7.centos will be updated
—> Package plymouth.x86_64 0:0.8.9-0.33.20140113.el7.centos will be an update
—> Package plymouth-core-libs.x86_64 0:0.8.9-0.31.20140113.el7.centos will be updated
—> Package plymouth-core-libs.x86_64 0:0.8.9-0.33.20140113.el7.centos will be an update
—> Package plymouth-scripts.x86_64 0:0.8.9-0.31.20140113.el7.centos will be updated
—> Package plymouth-scripts.x86_64 0:0.8.9-0.33.20140113.el7.centos will be an update
—> Package policycoreutils.x86_64 0:2.5-29.el7_6.1 will be updated
—> Package policycoreutils.x86_64 0:2.5-34.el7 will be an update
—> Package polkit.x86_64 0:0.112-18.el7_6.1 will be updated
—> Package polkit.x86_64 0:0.112-26.el7 will be an update
—> Package postfix.x86_64 2:2.10.1-7.el7 will be updated
—> Package postfix.x86_64 2:2.10.1-9.el7 will be an update
—> Package procps-ng.x86_64 0:3.3.10-23.el7 will be updated
—> Package procps-ng.x86_64 0:3.3.10-27.el7 will be an update
—> Package psmisc.x86_64 0:22.20-15.el7 will be updated
—> Package psmisc.x86_64 0:22.20-16.el7 will be an update
—> Package python.x86_64 0:2.7.5-80.el7_6 will be updated
—> Package python.x86_64 0:2.7.5-88.el7 will be an update
—> Package python-chardet.noarch 0:2.2.1-1.el7_1 will be updated
—> Package python-chardet.noarch 0:2.2.1-3.el7 will be an update
—> Package python-firewall.noarch 0:0.5.3-5.el7 will be updated
—> Package python-firewall.noarch 0:0.6.3-8.el7_8.1 will be an update
—> Package python-jinja2.noarch 0:2.7.2-3.el7_6 will be updated
—> Package python-jinja2.noarch 0:2.7.2-4.el7 will be an update
—> Package python-libs.x86_64 0:2.7.5-80.el7_6 will be updated
—> Package python-libs.x86_64 0:2.7.5-88.el7 will be an update
—> Package python-linux-procfs.noarch 0:0.4.9-4.el7 will be updated
—> Package python-linux-procfs.noarch 0:0.4.11-4.el7 will be an update
—> Package python-perf.x86_64 0:3.10.0-957.21.3.el7 will be updated
—> Package python-perf.x86_64 0:3.10.0-1127.19.1.el7 will be an update
—> Package python-requests.noarch 0:2.6.0-1.el7_1 will be updated
—> Package python-requests.noarch 0:2.6.0-9.el7_8 will be an update
—> Package python-urlgrabber.noarch 0:3.10-9.el7 will be updated
—> Package python-urlgrabber.noarch 0:3.10-10.el7 will be an update
—> Package python-urllib3.noarch 0:1.10.2-5.el7 will be updated
—> Package python-urllib3.noarch 0:1.10.2-7.el7 will be an update
—> Package quota.x86_64 1:4.01-17.el7 will be updated
—> Package quota.x86_64 1:4.01-19.el7 will be an update
—> Package quota-nls.noarch 1:4.01-17.el7 will be updated
—> Package quota-nls.noarch 1:4.01-19.el7 will be an update
—> Package readline.x86_64 0:6.2-10.el7 will be updated
—> Package readline.x86_64 0:6.2-11.el7 will be an update
—> Package redhat-rpm-config.noarch 0:9.1.0-87.el7.centos will be updated
—> Package redhat-rpm-config.noarch 0:9.1.0-88.el7.centos will be an update
–> Processing Dependency: python-srpm-macros for package: redhat-rpm-config-9.1.0-88.el7.centos.noarch
—> Package rpcbind.x86_64 0:0.2.0-47.el7 will be updated
—> Package rpcbind.x86_64 0:0.2.0-49.el7 will be an update
—> Package rpm.x86_64 0:4.11.3-35.el7 will be updated
—> Package rpm.x86_64 0:4.11.3-43.el7 will be an update
—> Package rpm-build.x86_64 0:4.11.3-35.el7 will be updated
—> Package rpm-build.x86_64 0:4.11.3-43.el7 will be an update
—> Package rpm-build-libs.x86_64 0:4.11.3-35.el7 will be updated
—> Package rpm-build-libs.x86_64 0:4.11.3-43.el7 will be an update
—> Package rpm-libs.x86_64 0:4.11.3-35.el7 will be updated
—> Package rpm-libs.x86_64 0:4.11.3-43.el7 will be an update
—> Package rpm-python.x86_64 0:4.11.3-35.el7 will be updated
—> Package rpm-python.x86_64 0:4.11.3-43.el7 will be an update
—> Package rsync.x86_64 0:3.1.2-6.el7_6.1 will be updated
—> Package rsync.x86_64 0:3.1.2-10.el7 will be an update
—> Package rsyslog.x86_64 0:8.24.0-34.el7 will be updated
—> Package rsyslog.x86_64 0:8.24.0-52.el7_8.2 will be an update
—> Package sangoma-pbx.noarch 0:2002-2.sng7 will be updated
—> Package sangoma-pbx.noarch 0:2008-1.sng7 will be an update
—> Package sangoma-release.x86_64 0:7-5.1805.02.el7.sangoma will be updated
—> Package sangoma-release.x86_64 0:7-8.2003.3.el7.sangoma will be an update
—> Package sed.x86_64 0:4.2.2-5.el7 will be updated
—> Package sed.x86_64 0:4.2.2-6.el7 will be an update
—> Package selinux-policy.noarch 0:3.13.1-229.el7_6.12 will be updated
—> Package selinux-policy.noarch 0:3.13.1-266.el7_8.1 will be an update
—> Package selinux-policy-targeted.noarch 0:3.13.1-229.el7_6.12 will be updated
—> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1 will be an update
—> Package setup.noarch 0:2.8.71-10.el7 will be updated
—> Package setup.noarch 0:2.8.71-11.el7 will be an update
—> Package shadow-utils.x86_64 2:4.1.5.1-25.el7_6.1 will be updated
—> Package shadow-utils.x86_64 2:4.6-5.el7 will be an update
—> Package shared-mime-info.x86_64 0:1.8-4.el7 will be updated
—> Package shared-mime-info.x86_64 0:1.8-5.el7 will be an update
—> Package shim-x64.x86_64 0:15-2.el7.centos will be updated
—> Package shim-x64.x86_64 0:15-8.el7 will be an update
—> Package sox.x86_64 0:14.4.1-6.el7 will be updated
—> Package sox.x86_64 0:14.4.1-7.el7 will be an update
—> Package sqlite.x86_64 0:3.7.17-8.el7 will be updated
—> Package sqlite.x86_64 0:3.7.17-8.el7_7.1 will be an update
—> Package ssh_keys.noarch 0:3.1-73.sng7 will be updated
—> Package ssh_keys.noarch 0:3.1-76.sng7 will be an update
—> Package sudo.x86_64 0:1.8.23-3.el7 will be updated
—> Package sudo.x86_64 0:1.8.23-9.el7 will be an update
—> Package sysstat.x86_64 0:10.1.5-17.el7 will be updated
—> Package sysstat.x86_64 0:10.1.5-19.el7 will be an update
—> Package systemd.x86_64 0:219-62.el7_6.7 will be updated
—> Package systemd.x86_64 0:219-73.el7_8.9 will be an update
—> Package systemd-libs.x86_64 0:219-62.el7_6.7 will be updated
—> Package systemd-libs.x86_64 0:219-73.el7_8.9 will be an update
—> Package systemd-sysv.x86_64 0:219-62.el7_6.7 will be updated
—> Package systemd-sysv.x86_64 0:219-73.el7_8.9 will be an update
—> Package tcpdump.x86_64 14:4.9.2-3.el7 will be updated
—> Package tcpdump.x86_64 14:4.9.2-4.el7_7.1 will be an update
—> Package telnet.x86_64 1:0.17-64.el7 will be updated
—> Package telnet.x86_64 1:0.17-65.el7_8 will be an update
—> Package tftp-server.x86_64 0:5.2-23.6.sng7 will be updated
—> Package tftp-server.x86_64 0:5.2-23.8.sng7 will be an update
—> Package tmpwatch.x86_64 0:2.11-5.el7 will be updated
—> Package tmpwatch.x86_64 0:2.11-6.el7 will be an update
—> Package tuned.noarch 0:2.10.0-6.el7_6.3 will be updated
—> Package tuned.noarch 0:2.11.0-8.el7 will be an update
—> Package tzdata.noarch 0:2019b-1.el7 will be updated
—> Package tzdata.noarch 0:2020a-1.el7 will be an update
—> Package tzdata-java.noarch 0:2019b-1.el7 will be updated
—> Package tzdata-java.noarch 0:2020a-1.el7 will be an update
—> Package unbound-libs.x86_64 0:1.6.6-1.el7 will be updated
—> Package unbound-libs.x86_64 0:1.6.6-5.el7_8 will be an update
—> Package unixODBC.x86_64 0:2.3.1-11.el7 will be updated
—> Package unixODBC.x86_64 0:2.3.1-14.el7 will be an update
—> Package unzip.x86_64 0:6.0-19.el7 will be updated
—> Package unzip.x86_64 0:6.0-21.el7 will be an update
—> Package urw-base35-fonts.noarch 0:20170801-10.el7 will be obsoleting
–> Processing Dependency: urw-base35-fonts-common = 20170801-10.el7 for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-z003-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-standard-symbols-ps-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-p052-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-nimbus-sans-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-nimbus-roman-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-nimbus-mono-ps-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-gothic-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-d050000l-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-c059-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
–> Processing Dependency: urw-base35-bookman-fonts for package: urw-base35-fonts-20170801-10.el7.noarch
—> Package urw-fonts.noarch 0:2.4-16.el7 will be obsoleted
—> Package usermode.x86_64 0:1.111-5.el7 will be updated
—> Package usermode.x86_64 0:1.111-6.el7 will be an update
—> Package util-linux.x86_64 0:2.23.2-59.el7_6.1 will be updated
—> Package util-linux.x86_64 0:2.23.2-63.el7 will be an update
—> Package vim-common.x86_64 2:7.4.160-6.el7_6 will be updated
—> Package vim-common.x86_64 2:7.4.629-6.el7 will be an update
—> Package vim-enhanced.x86_64 2:7.4.160-6.el7_6 will be updated
—> Package vim-enhanced.x86_64 2:7.4.629-6.el7 will be an update
—> Package vim-filesystem.x86_64 2:7.4.160-6.el7_6 will be updated
—> Package vim-filesystem.x86_64 2:7.4.629-6.el7 will be an update
—> Package vim-minimal.x86_64 2:7.4.160-6.el7_6 will be updated
—> Package vim-minimal.x86_64 2:7.4.629-6.el7 will be an update
—> Package vsftpd.x86_64 0:3.0.2-25.el7 will be updated
—> Package vsftpd.x86_64 0:3.0.2-27.el7 will be an update
—> Package wanpipe.x86_64 0:7.0.25-2.sng7 will be updated
—> Package wanpipe.x86_64 0:7.0.25-3.sng7 will be an update
—> Package wireshark.x86_64 0:1.10.14-16.el7 will be updated
—> Package wireshark.x86_64 0:1.10.14-24.el7 will be an update
—> Package xerces-c.x86_64 0:3.1.1-9.el7 will be updated
—> Package xerces-c.x86_64 0:3.1.1-10.el7_7 will be an update
—> Package xfsprogs.x86_64 0:4.5.0-19.el7_6 will be updated
—> Package xfsprogs.x86_64 0:4.5.0-20.el7 will be an update
—> Package xinetd.x86_64 2:2.3.15-13.el7 will be updated
—> Package xinetd.x86_64 2:2.3.15-14.el7 will be an update
—> Package yaml-cpp.x86_64 1:0.5.1-1.el7.2 will be updated
—> Package yaml-cpp.x86_64 1:0.5.1-2.el7 will be an update
—> Package yum.noarch 0:3.4.3-161.10.sng7 will be updated
—> Package yum.noarch 0:3.4.3-167.el7.centos will be an update
—> Package yum-plugin-fastestmirror.noarch 0:1.1.31-50.el7 will be updated
—> Package yum-plugin-fastestmirror.noarch 0:1.1.31-54.el7_8 will be an update
—> Package yum-plugin-versionlock.noarch 0:1.1.31-50.el7 will be updated
—> Package yum-plugin-versionlock.noarch 0:1.1.31-54.el7_8 will be an update
—> Package yum-utils.noarch 0:1.1.31-50.el7 will be updated
—> Package yum-utils.noarch 0:1.1.31-54.el7_8 will be an update
–> Running transaction check
—> Package bind-export-libs.x86_64 32:9.11.4-16.P2.el7_8.6 will be installed
—> Package geoipupdate.x86_64 0:2.5.0-1.el7 will be installed
—> Package libgs.x86_64 0:9.25-2.el7_7.3 will be installed
–> Processing Dependency: adobe-mappings-pdf for package: libgs-9.25-2.el7_7.3.x86_64
–> Processing Dependency: adobe-mappings-cmap-deprecated for package: libgs-9.25-2.el7_7.3.x86_64
–> Processing Dependency: adobe-mappings-cmap for package: libgs-9.25-2.el7_7.3.x86_64
–> Processing Dependency: libpaper.so.1()(64bit) for package: libgs-9.25-2.el7_7.3.x86_64
–> Processing Dependency: libopenjp2.so.7()(64bit) for package: libgs-9.25-2.el7_7.3.x86_64
—> Package python-srpm-macros.noarch 0:3-32.el7 will be installed
—> Package urw-base35-bookman-fonts.noarch 0:20170801-10.el7 will be installed
–> Processing Dependency: xorg-x11-server-utils for package: urw-base35-bookman-fonts-20170801-10.el7.noarch
–> Processing Dependency: xorg-x11-server-utils for package: urw-base35-bookman-fonts-20170801-10.el7.noarch
—> Package urw-base35-c059-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-d050000l-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-fonts-common.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-gothic-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-nimbus-mono-ps-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-nimbus-roman-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-nimbus-sans-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-p052-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-standard-symbols-ps-fonts.noarch 0:20170801-10.el7 will be installed
—> Package urw-base35-z003-fonts.noarch 0:20170801-10.el7 will be installed
–> Running transaction check
—> Package adobe-mappings-cmap.noarch 0:20171205-3.el7 will be installed
—> Package adobe-mappings-cmap-deprecated.noarch 0:20171205-3.el7 will be installed
—> Package adobe-mappings-pdf.noarch 0:20180407-1.el7 will be installed
—> Package libpaper.x86_64 0:1.1.24-8.el7 will be installed
—> Package openjpeg2.x86_64 0:2.3.1-3.el7_7 will be installed
—> Package xorg-x11-server-utils.x86_64 0:7.7-20.el7 will be installed
–> Processing Dependency: libXxf86misc.so.1()(64bit) for package: xorg-x11-server-utils-7.7-20.el7.x86_64
–> Processing Dependency: libXmuu.so.1()(64bit) for package: xorg-x11-server-utils-7.7-20.el7.x86_64
–> Processing Dependency: libXmu.so.6()(64bit) for package: xorg-x11-server-utils-7.7-20.el7.x86_64
–> Running transaction check
—> Package libXmu.x86_64 0:1.1.2-2.el7 will be installed
—> Package libXxf86misc.x86_64 0:1.0.3-7.1.el7 will be installed
–> Finished Dependency Resolution
–> Running transaction check
—> Package kernel.x86_64 0:3.10.0-693.21.1.el7 will be erased
no --> Processing Dependency: kernel(napi_complete_done) = 0x905307be for package: kmod-via-rhine-1.5.2-1.sng7.x86_64
–> Processing Dependency: kernel(napi_complete_done) = 0x905307be for package: kmod-via-velocity-1.16-1.sng7.x86_64
–> Running transaction check
—> Package kmod-via-rhine.x86_64 0:1.5.2-1.sng7 will be erased
–> Processing Dependency: kmod-via-rhine for package: sangoma-pbx-2008-1.sng7.noarch
—> Package kmod-via-velocity.x86_64 0:1.16-1.sng7 will be erased
–> Processing Dependency: kmod-via-velocity for package: sangoma-pbx-2008-1.sng7.noarch
–> Finished Dependency Resolution
Error: Package: sangoma-pbx-2008-1.sng7.noarch (sng-pkgs)
Requires: kmod-via-rhine
Removing: kmod-via-rhine-1.5.2-1.sng7.x86_64 (@anaconda/1703)
kmod-via-rhine = 1.5.2-1.sng7
Available: kmod-via-rhine-1.5.1-4.sng7.x86_64 (sng-pkgs)
kmod-via-rhine = 1.5.1-4.sng7
Available: kmod-via-rhine-1.5.1-5.sng7.x86_64 (sng-pkgs)
kmod-via-rhine = 1.5.1-5.sng7
Available: kmod-via-rhine-1.5.1-6.sng7.x86_64 (sng-pkgs)
kmod-via-rhine = 1.5.1-6.sng7
Error: Package: sangoma-pbx-2008-1.sng7.noarch (sng-pkgs)
Requires: kmod-via-velocity
Removing: kmod-via-velocity-1.16-1.sng7.x86_64 (@anaconda/1703)
kmod-via-velocity = 1.16-1.sng7
Available: kmod-via-velocity-1.15-2.sng7.x86_64 (sng-pkgs)
kmod-via-velocity = 1.15-2.sng7
Available: kmod-via-velocity-1.15-3.sng7.x86_64 (sng-pkgs)
kmod-via-velocity = 1.15-3.sng7
Available: kmod-via-velocity-1.15-4.sng7.x86_64 (sng-pkgs)
kmod-via-velocity = 1.15-4.sng7
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
[root@uepbx1 ~]#

Posts: 1

Participants: 1

Read full topic

@quazimotto wrote:

Greetings All,

I have installed SNG7 and I cannot access the box with Terra-Term or WinSCP. It rejects my attempts. What linux command do I nee to issue?

Quaz

Posts: 3

Participants: 3

Read full topic

@rastermus wrote:

Hi,
I’m trying to load Distro STABLE SNG7-PBX-64bit-2008-1.
In the anaconda configuration screen I get the message “Cannot Save Storage Configuration” in the storage config section.
I get the same issue with SNG7-PBX-64bit-1904, however I CAN successfully install Centos 7 using the same anaconda installer just fine using the automatically selected settings, and it runs perfectly.

I’m trying to install on a INTEL Z83 mini SBC with 64GB of storage and 8GB ram.

Any help would be appreciated.

Posts: 2

Participants: 2

Read full topic

@thn80 wrote:

If I try to upgrade my FreePBX 15.0.16.75 via automatic GUI updates or via the console I get the following error all the time:

Could not retrieve mirrorlist http://mirrorlist.sangoma.net/?release=7&arch=x86_64&repo=os&dist=$dist&staging=$staging error was
12: Timeout on http://mirrorlist.sangoma.net/?release=7&arch=x86_64&repo=os&dist=$dist&staging=$staging: (28, ‘Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds’)

I already tried to restart the system, without success.

What can be done to get the updates working again?

Thanks,

Thomas

Posts: 1

Participants: 1

Read full topic

@MacsOffice wrote:

I attempted to update and was met with
RPM command errored, Delete /dev/shm/yumwrapper/* and try again. Exit code 1 - see FreePBX log for more info.
I then attempted to log in using putty and my known password doesn’t work. No other problems exist, I can enter the GUI fine, I was just trying to update. Are these two events related? How do I dig out of this?

Posts: 1

Participants: 1

Read full topic

@peterthesing wrote:

When I try to install my freshly burned sangoma dvd containing asterix and freepbx I got an error message on my monitor /display it is “out of range”. When I install opensuse 15.1 with asterix and other software such as apache then there are NO problems. Could this issue have something to do with the sangoma software?
Please advise and thank in advance

Posts: 5

Participants: 2

Read full topic

@RichE wrote:

FreePBX1.jpg4032×3024 3.34 MB

For some strange reason which is beyong me, my FreePBX stopped working and when i reboot it i get a choice of two versions, if i leave it or select the top one 3.10.0-1127.19.1.e17.x86_64 it goes in to kernel panic and freezes.

Second one boots fine extension work, but no DAHDI trunks (1) or SIP trunks.

All seams to have happened after some modules where recently upgraded.

Anybody else come across this yet, before I flatten the system and start again?

Posts: 1

Participants: 1

Read full topic

@mustachio wrote:

Just spun up a new FreePBX 13 box, and every time i reboot it, even though it has been fully installed, it keeps returning to the installation GUI, and will not auto boot from the local drive. Please help!

Posts: 4

Participants: 2

Read full topic

@magnum406 wrote:

I am typing yum clean all and then yum update. The detail of the failure follows:

—> Package yaml-cpp.x86_64 1:0.5.1-2.el7 will be an update
–> Running transaction check
—> Package libsecret.x86_64 0:0.18.6-1.el7 will be installed
—> Package py3libacl.x86_64 0:0.5.2-13.el7 will be installed
—> Package python3.x86_64 0:3.6.8-13.el7 will be installed
–> Processing Dependency: python3-libs(x86-64) = 3.6.8-13.el7 for package: python3-3.6.8-13.el7.x86_64
–> Processing Dependency: python3-pip for package: python3-3.6.8-13.el7.x86_64
—> Package python3-setuptools.noarch 0:39.2.0-10.el7 will be installed
—> Package rdiff-backup.x86_64 0:2.0.5-2.el7 will be an update
–> Processing Dependency: python36-pyxattr for package: rdiff-backup-2.0.5-2.el7.x86_64
–> Running transaction check
—> Package python3-libs.x86_64 0:3.6.8-13.el7 will be installed
—> Package python3-pip.noarch 0:9.0.3-7.el7_7 will be installed
—> Package rdiff-backup.x86_64 0:2.0.5-2.el7 will be an update
–> Processing Dependency: python36-pyxattr for package: rdiff-backup-2.0.5-2.el7.x86_64
–> Finished Dependency Resolution
–> Running transaction check
—> Package kernel.x86_64 0:3.10.0-862.2.3.el7 will be erased
—> Package rdiff-backup.x86_64 0:2.0.5-2.el7 will be an update
–> Processing Dependency: python36-pyxattr for package: rdiff-backup-2.0.5-2.el7.x86_64
–> Finished Dependency Resolution
Error: Package: rdiff-backup-2.0.5-2.el7.x86_64 (sng-epel)
Requires: python36-pyxattr
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest

I saw this on another ticket and we are having the same problem.

Does anyone have any suggestions?

Regards!

Posts: 1

Participants: 1

Read full topic

@bradm413 wrote:

FreePBX 14.0.13.40
PBX Distro: 12.7.6-2002-2.sng7
Asterisk Version: 13.32.0

It’s been a while since I’ve seen any system updates available in the GUI Dashboard. Recently I saw a bunch of updates show up, so this morning I decided to update them, and it seems to get stuck with the following output:

http://sng7.com/os/7.8/os/x86_64/Packages/device-mapper-persistent-data-0.8.5-2.el7.x86_64.rpm: [Errno 12] Timeout on http://sng7.com/os/7.8/os/x86_64/Packages/device-mapper-persistent-data-0.8.5-2.el7.x86_64.rpm: (28, 'Operation too slow. Less than 1000 bytes/sec transferred the last 30 seconds')
Trying other mirror.

Eventually (I guess after it tries all the mirrors it knows of) I start seeing this message repeating:

Another app is currently holding the yum lock; waiting for it to exit...
  The other application is: yum
    Memory : 152 M RSS (552 MB VSZ)
    Started: Fri Oct  9 07:48:54 2020 - 37:42 ago
    State  : Sleeping, pid: 12177

I found another post in these forums that seemed to be similar, and one of the recommendations was to reboot. I rebooted the server early this morning, and I ran yum update from the console, and still saw similar errors. At some point (I don’t remember the exact order of events…) I was unable to connect to the server over the network. I rebooted again, and I could access it again. After the 2nd reboot, I tried System updates from the GUI again, and I’m back in the same situation outlined above.

Everything seems to work (web interface, phone calls, etc…), but I’d like to keep our server updated.

I’m not a Linux pro, but I can manage files & run commands if instructed what to run. Any assistance is appreciated.

Posts: 1

Participants: 1

Read full topic

@staticsyphon wrote:

Hello,

I’m trying to update some modules on my older FreePBX install, but I’m getting a dependency error when trying to upgrade, e.g. sysadmin:

➜  ~ sudo yum install sysadmin 
Loaded plugins: etckeeper, fastestmirror, langpacks
Loading mirror speeds from cached hostfile
 * base: centos.s.uw.edu
 * extras: sjc.edge.kernel.org
 * updates: mirrors.ocf.berkeley.edu
Resolving Dependencies
--> Running transaction check
---> Package sysadmin.noarch 0:2.8.0-2.shmz65.1.45 will be updated
---> Package sysadmin.noarch 0:5.3-3.0.0.2.2.sng will be an update
--> Processing Dependency: php < 5.4 for package: sysadmin-5.3-3.0.0.2.2.sng.noarch
--> Finished Dependency Resolution
Error: Package: sysadmin-5.3-3.0.0.2.2.sng.noarch (schmooze-commercial)
           Requires: php < 5.4
           Installed: php-5.4.16-36.el7_1.x86_64 (@base)
               php = 5.4.16-36.el7_1
           Available: php-5.4.16-48.el7.x86_64 (base)
               php = 5.4.16-48.el7

Should I manually install an older version of PHP or do I need to update my repo list to include a “post-schmooze” source? Any other suggestions would be greatly appreciated!

Posts: 1

Participants: 1

Read full topic

@vlinas wrote:

Hello everyone,

i have Asterisk 13.8.1 built by mockbuild @ jenkins2.schmoozecom.net on a x86_64 running Linux with Yealink ip phones registered on VLan from previous IT guy.

Is there installation of Graphical Interface like Gnome Gui on Centos?

I want to be able to make changes remotely with teamviewer

Thank you in advance

Posts: 1

Participants: 1

Read full topic

@openpbx wrote:

I have beeing trying to install the FreePBX distro on a spare computer and it always gets stuck for quite sometime on 625/729 which is kmod-dhadi-linux and then starts going again and then the same happens for kmod-wanpipe. Then when it finishes I select reboot and then it just sits there and last night I left it and this morning it was sill on the same screen which was

4m[terminating]

So after letting it try to reboot after the install for 24 hours I forced shut the computer down and then booted it back up, all looked good until I logged in and was greeted with a ton of errors. I cleared the drive and doing another install and will post the errors I get once it gets done.

Posts: 1

Participants: 1

Read full topic

@lgaetz wrote:

https://issues.freepbx.org/browse/FREEPBX-21947

On the Distro, when you login via ssh, you get an immediate status screen indicating if there are pending updates. There is also a check for updates that happens in the background which takes a while to complete. The displayed text is the result of the previous check, not the one that is happening currently on login, so the displayed info is often stale. It can also take a while for the background check to complete, during which time yum is locked.

It seems like a good idea, but the implementation causes more confusion than is solves. I think it should be removed, but wanted to solicit opinions (particularly opposing opinions) before doing so.

Thoughts from the community?

Posts: 11

Participants: 7

Read full topic

@able wrote:

[root@freepbx ~]# yum update
Loaded plugins: fastestmirror, versionlock
Loading mirror speeds from cached hostfile
Resolving Dependencies
–> Running transaction check
—> Package apcupsd.x86_64 0:3.14.14-5.el7 will be updated
—> Package apcupsd.x86_64 0:3.14.14-18.el7 will be an update
—> Package asterisk-version-switch.noarch 0:6.1-1.sng7 will be updated
—> Package asterisk-version-switch.noarch 0:6.1-2.sng7 will be an update
—> Package asterisk16-flite.x86_64 0:2.4-6_2505af1.sng7 will be updated
—> Package asterisk16-flite.x86_64 0:2.4-9_2505af1.sng7 will be an update
—> Package asterisk16-res_digium_phone.x86_64 0:3.5.3-2.sng7 will be updated
—> Package asterisk16-res_digium_phone.x86_64 0:3.5.5-1.sng7 will be an update
—> Package ca-certificates.noarch 0:2019.2.32-76.el7_7 will be updated
—> Package ca-certificates.noarch 0:2020.2.41-70.0.el7_8 will be an update
—> Package curl.x86_64 0:7.29.0-57.el7 will be updated
—> Package curl.x86_64 0:7.29.0-57.el7_8.1 will be an update
—> Package dbus.x86_64 1:1.10.24-13.el7_6 will be updated
—> Package dbus.x86_64 1:1.10.24-14.el7_8 will be an update
—> Package dbus-libs.x86_64 1:1.10.24-13.el7_6 will be updated
—> Package dbus-libs.x86_64 1:1.10.24-14.el7_8 will be an update
—> Package ffmpeg.x86_64 0:3.1.1-2.sng7 will be updated
—> Package ffmpeg.x86_64 0:3.1.1-4.sng7 will be an update
—> Package ffmpeg-libs.x86_64 0:3.1.1-2.sng7 will be updated
—> Package ffmpeg-libs.x86_64 0:3.1.1-4.sng7 will be an update
—> Package grub2.x86_64 1:2.02-0.81.el7.centos will be updated
—> Package grub2.x86_64 1:2.02-0.86.el7.centos will be an update
—> Package grub2-common.noarch 1:2.02-0.81.el7.centos will be updated
—> Package grub2-common.noarch 1:2.02-0.86.el7.centos will be an update
—> Package grub2-efi-x64.x86_64 1:2.02-0.81.el7.centos will be updated
—> Package grub2-efi-x64.x86_64 1:2.02-0.86.el7.centos will be an update
—> Package grub2-pc.x86_64 1:2.02-0.81.el7.centos will be updated
—> Package grub2-pc.x86_64 1:2.02-0.86.el7.centos will be an update
—> Package grub2-pc-modules.noarch 1:2.02-0.81.el7.centos will be updated
—> Package grub2-pc-modules.noarch 1:2.02-0.86.el7.centos will be an update
—> Package grub2-tools.x86_64 1:2.02-0.81.el7.centos will be updated
—> Package grub2-tools.x86_64 1:2.02-0.86.el7.centos will be an update
—> Package grub2-tools-extra.x86_64 1:2.02-0.81.el7.centos will be updated
—> Package grub2-tools-extra.x86_64 1:2.02-0.86.el7.centos will be an update
—> Package grub2-tools-minimal.x86_64 1:2.02-0.81.el7.centos will be updated
—> Package grub2-tools-minimal.x86_64 1:2.02-0.86.el7.centos will be an update
—> Package java-1.8.0-openjdk.x86_64 1:1.8.0.252.b09-2.el7_8 will be updated
—> Package java-1.8.0-openjdk.x86_64 1:1.8.0.262.b10-0.el7_8 will be an update
—> Package java-1.8.0-openjdk-headless.x86_64 1:1.8.0.252.b09-2.el7_8 will be updated
—> Package java-1.8.0-openjdk-headless.x86_64 1:1.8.0.262.b10-0.el7_8 will be an update
—> Package kernel.x86_64 0:3.10.0-1127.19.1.el7 will be installed
—> Package kernel-headers.x86_64 0:3.10.0-1127.10.1.el7 will be updated
—> Package kernel-headers.x86_64 0:3.10.0-1127.19.1.el7 will be an update
—> Package kmod-via-rhine.x86_64 0:1.5.1-5.sng7 will be updated
—> Package kmod-via-rhine.x86_64 0:1.5.1-6.sng7 will be an update
—> Package kmod-via-velocity.x86_64 0:1.15-3.sng7 will be updated
—> Package kmod-via-velocity.x86_64 0:1.15-4.sng7 will be an update
—> Package libavdevice.x86_64 0:3.1.1-2.sng7 will be updated
—> Package libavdevice.x86_64 0:3.1.1-4.sng7 will be an update
—> Package libcurl.x86_64 0:7.29.0-57.el7 will be updated
—> Package libcurl.x86_64 0:7.29.0-57.el7_8.1 will be an update
—> Package mokutil.x86_64 0:15-2.el7.centos will be updated
—> Package mokutil.x86_64 0:15-8.el7 will be an update
—> Package nodejs.x86_64 2:8.11.3-1.7 will be updated
—> Package nodejs.x86_64 2:8.16.0-1.11 will be an update
—> Package ntp.x86_64 0:4.2.6p5-29.el7.centos will be updated
—> Package ntp.x86_64 0:4.2.6p5-29.el7.centos.2 will be an update
—> Package ntpdate.x86_64 0:4.2.6p5-29.el7.centos will be updated
—> Package ntpdate.x86_64 0:4.2.6p5-29.el7.centos.2 will be an update
—> Package openvpn.x86_64 0:2.4.7-1.el7 will be updated
—> Package openvpn.x86_64 0:2.4.9-1.el7 will be an update
—> Package python-perf.x86_64 0:3.10.0-1127.10.1.el7 will be updated
—> Package python-perf.x86_64 0:3.10.0-1127.19.1.el7 will be an update
—> Package rsyslog.x86_64 0:8.24.0-52.el7 will be updated
—> Package rsyslog.x86_64 0:8.24.0-52.el7_8.2 will be an update
—> Package selinux-policy.noarch 0:3.13.1-266.el7 will be updated
—> Package selinux-policy.noarch 0:3.13.1-266.el7_8.1 will be an update
—> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7 will be updated
—> Package selinux-policy-targeted.noarch 0:3.13.1-266.el7_8.1 will be an update
—> Package shim-x64.x86_64 0:15-2.el7.centos will be updated
—> Package shim-x64.x86_64 0:15-8.el7 will be an update
—> Package sysadmin.noarch 0:5.6-5.6.44.sng will be updated
—> Package sysadmin.noarch 0:5.6-5.6.47.sng will be an update
—> Package systemd.x86_64 0:219-73.el7_8.6 will be updated
—> Package systemd.x86_64 0:219-73.el7_8.9 will be an update
—> Package systemd-libs.x86_64 0:219-73.el7_8.6 will be updated
—> Package systemd-libs.x86_64 0:219-73.el7_8.9 will be an update
—> Package systemd-sysv.x86_64 0:219-73.el7_8.6 will be updated
—> Package systemd-sysv.x86_64 0:219-73.el7_8.9 will be an update
—> Package tftp-server.x86_64 0:5.2-23.6.sng7 will be updated
—> Package tftp-server.x86_64 0:5.2-23.8.sng7 will be an update
—> Package unbound-libs.x86_64 0:1.6.6-3.el7 will be updated
—> Package unbound-libs.x86_64 0:1.6.6-5.el7_8 will be an update
—> Package yaml-cpp.x86_64 1:0.5.1-1.el7.2 will be updated
—> Package yaml-cpp.x86_64 1:0.5.1-2.el7 will be an update
–> Finished Dependency Resolution
–> Running transaction check
—> Package kernel.x86_64 0:3.10.0-514.26.2.el7 will be erased
–> Processing Dependency: kernel(napi_complete_done) = 0x905307be for package: kmod-forcedeth-0.65-1.sng7.x86_64
–> Processing Dependency: kernel(skb_clone_tx_timestamp) = 0x83433c92 for package: kmod-forcedeth-0.65-1.sng7.x86_64
–> Running transaction check
—> Package kmod-forcedeth.x86_64 0:0.65-1.sng7 will be erased
–> Processing Dependency: kmod-forcedeth for package: sangoma-pbx-2008-1.sng7.noarch
–> Running transaction check
—> Package sangoma-pbx.noarch 0:2008-1.sng7 will be erased
–> Finished Dependency Resolution
Error: Trying to remove “sangoma-pbx”, which is protected

PBX Version: 15.0.16.75
PBX Distro:12.7.8-2008-1.sng7
Asterisk Version:16.13.0

tried the solutions around the forums, but they do not work (no broken updates afaik)

no repositories changed, ran out of options
appreciate help/options

thanks
A

Posts: 3

Participants: 2

Read full topic

@AdHominem wrote:

I run my FreePBX on a ESXi VM. For years, I’ve given it 2GB of RAM and it’s run just fine.

After a recent upgrade earlier this year, I noticed that my machine would have some sluggishness even when handling a single call. Often there would be a delay of several seconds after calls were answered and before audio was passed.

I examined the memory chart on the main FreePBX page and noticed that the memory was 52% used with 41% being cached. 3% was being used in swap file. I developed a theory that the swap file was slowing everything down.

I did some research and learned about how the cache and the swap file are used, and started to wonder why my system was using a swapfile at all. Cache is supposed to be freed up when memory is needed. In theory, swap shouldn’t be used at all unless there simply isn’t enough RAM to run the apps. At 52% usage, I was nowhere near there.

So, I learned a bit more about “Swappiness,” and I ran across this page:

https://linuxhint.com/understanding_vm_swappiness/

which indicates that Swappiness tells Linux when to start using swap files. The default is 60, which appears to mean that when free memory reaches 60% (or less), it should start using a swap file. The same page indicates that server systems should use a much lower setting. It also indicates that MariaDB based systems should set Swappiness to 1 (ONE).

The FreePBX distro has Swappiness set to 30. Given that FreePBX used MariaDB, and that swapping is undesirable, shouldn’t the FreePBX distro have swappiness set to 1???

In the meantime, I’ve increased by available RAM to 4GB, and the system seems to be working again. All the same, I thought that I’d consult the gurus and see what you think…

Should swappiness be set to 1?

Posts: 2

Participants: 2

Read full topic

@ilouiemiami wrote:

Guys, I’ve tried installing the latest Distro downloaded from FreePBX onto a DigitalOcean Droplet, and while installing I was forced to add SSH Keys instead of a Password. My issue is that, now I can’t log in to the server with keys. It keeps saying Server Refused Our keys. I’ll need to access server in order to update it. Would I be able to update server using the GUI?.. Also, I tried getting in using the Access Console in the droplet, but I was met with Freepbx login: and Password… Would anyone know what info would work. Thanks in advance.

Posts: 5

Participants: 2

Read full topic